All your requirement for power over Ethernet Installations.



Liverpool

Email:info@multitel.co.uk

Telephone 44(0)151 548 8122

FAX 44(0) 709 210 1464

ADAPTORS
Power Over Ethernet 12 Volt.
Typical power over Ethernet setup.

Specifications

Splitter

Input Voltage48VDC/0.3A
Output Voltage:12VDC/1A (Maximum)
Efficiency:73% Min
Protection:Any output Short GND Terminal will not damage the Power Supply and will Auto-Reset
Operation:- Temperature: 0 ~+60 ° C
- Humidity: 5% ~90%
Storage:Temperature: -10 ~+70 ° C
Dimension:85mm (d) * 76mm (w) * 36mm (h)
Weight:135g
CAT-5 UTP Cable Length:200mm, RJ-45 plug
DC Power Cable Length:200mm, DC power plug
DC Power Plug:diameter: 2.5F/ 5.5F, length: 12+/-0.5mm, 180 degree angle, Polarity : inside (+), outside (-)

Power Injector:

Input Voltage: AC 100V - AC 240V
Output Voltage:DC 48V, 350mA
Efficiency:75% Min
Protection:- Short Circuit Protection
- Over Load Protection
- High Voltage Protection
Operation:- Temperature: 0 ~ +60 ° C
- Humidity: 5% ~90%
Storage:Temperature: -10 ~+70 °
Dimension:85mm (L) * 76mm (W) * 36mm (H)

Features

** The maximum distance of RJ-45 Cable between Power Injector and Splitter is 100m. Splitter Features:
1.Work with Power Injector, as a data/power splitter and DC to DC converter.
2. SHORT CIRCUIT PROTECTION: Any output Short GND Terminal will not damage the Power Supply and will.Auto-Reset.
Power Injector Features:
1. Transform AC power to 48V DC power. Inject 48V DC through CAT-5 cable pin# 4,5, 7, 8, into remote devices such as Wireless AP, IP Phone, Web Camera, etc.
2. Protection:
- Short Circuit Protection: Any output short GND terminal will lead Auto-Reset.
- Over Load Protection: Load Current over 450mA will lead Auto-Reset.
- High Voltage Protection: Output DC voltage over 52V will lead Auto-Reset


[MerseyWorld]