Liverpool European Capital of Culture 2008

Email:info@multitel.co.uk

Telephone 44(0)151 548 8122

FAX 44(0) 709 210 1464


ADAPTORS

Solwise 200Mbps HomePlug AV Ethernet Adaptor with Simple Connect & Mains Through

The Solwise HomePlug Ethernet Adaptor provides No New Wires communications to any room, over any powerline wires, at the speed of up to 200Mbps. Easy and secure pairing with "Simple Connect" Built-in AC Pass-thru with Powerline Noise Filtering Unsurpassed speed of 200Mbps - perfect for streaming HD IPTV and VoIP Telephony Dedicated QoS for Triple Play applications Circuit Breaker Protection Targeted at the residential users, the Solwise HomePlug AV unit is using Intellons INT6000 high-speed powerline chipset. With transfer rates of 200Mbps, Ethernet HomePlug AV can easily support full multimedia home networking throughout the whole house including simultaneous High Definition (HD) and Standard Definition (SD) video distribution, whole-house audio, Voice Over IP and high speed Internet in addition to data networking. It uses the power lines already installed in a home as a path to transmit digital data, voice, audio and video between devices. Enhanced Quality of Service (QOS) also provides the guaranteed bandwidth reservations for multimedia payloads including TV over IP (IPTV), higher data rate broadband sharing, Online-Gaming, VoIP Calls, extending Wireless LANs coverage, Audio-Video transmission across the network as well as Network camera connectivity. It is a plug, push and play solution that can be used wherever there is a wall socket, acting just like a physical network cable, streaming bandwidth to any room in the house. I t comes with a 128-bit AES encryption ensuring that your network communications is free from eavesdroppers and hackers. The Auto MDI/MDIX functionality of the Solwise HomePlug AV also simplifies and ensures a hassle free installation. The Solwise HomePlug AV offers SimpleConnect - a simpler way to set up your HomePlug network. With just the press of a button, HomePlug AV devices can create or join a secure network. No computer is needed. What’s more, this HomePlug comes with a power-pass-through feature, allowing the same socket it is occupying to be freed up for other devices. To ensure maximum security, the button on each HomePlug AV device in the network must be pushed within 2 minutes of the first one being pushed. More units can be added later, though - details are in the manual. You do not need to reset the whole HomePlug AV network. These units are sold as singles, you will require at least two to create your network. All versions of the AV products will talk to each other so long as they are on version 2 firmware or newer.

ADAPTORS

Protocol/Standards

HomePlug AV 1.0 specification IEEE 802.3 10/100 Ethernet (100 Mbps) and IEEE 802.3u Fast Ethernet Compliant. 10/100 Mbps Auto MDI/MDIx Support Co-Exisits with existing 14Mbps HomePlug 1.0 and 85Mbps Turbo HomePlug 1.0 but they will not talk to each other. All versions of the AV products will talk to each other so long as they are on version 2 firmware or newer.

Modulation Support


OFDM 1024/256/64/16/8 QAM, QPSK, BPSK and ROBO Modulation Scheme

Frequency Band

2Mhz to 30Mhz band

Quality of Service

TDMA channel access with Contention-Free and Contention-Based (CSMA/CA) period Channel Adaptation ensures that signal integrity is maintained even under harsh noise environment Four Level prioritized random access method based on contention access and multi-segment ToS and CoS Packet Classifier Supports IGMP managed multicast session

Security Support

128-bit AES Encryption with key management for secure powerline communications (Utilise Windows 98SE, 2000, ME, XP to enable encryption)

Hardware

Intellon INT6000 Integrated Single-chip Powerline Network Transceiver

Platform Support

OS Independent with TCP/IP protocol installed

Power supply

Switch Mode 100V-240V

LED Indicators

1 x Power LED 1 x Powerline Link/Activity Status LED 1 x Ethernet Link/Activity Status LED

External Connectors

1 x Electrical Power plug 1 x RJ45 for 10/100 Ethernet (AutoMDI/MDI-X) 1 x reset button 1 x push button for simple connect 1 x Filtered AC Pass through 1 x Circuit Breaker (10A max)

Temperature

Operating : 0o to 40 o Celsius 32 o to 104 o Fahrenheit Non-Operating : -25 o to 70 o Celsius -13 o to 158 o Fahrenheit

Humidity

Operating : 30% to 80% Relative Humidity (Non-Condensing) Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)




Easy start guide.



User Manual.




NOTE : Specifications are subject to change without prior notice

[MerseyWorld]